10.5 Dynamic DNS Settings
Pepwave routers are capable of registering the domain name relationships to dynamic DNS
service providers. Through registration with dynamic DNS service provider(s), the default
public Internet IP address of each WAN connection can be associated with a host name. With
dynamic DNS service enabled for a WAN connection, you can connect to your WAN's IP
address from the external, even if its IP address is dynamic. You must register for an account
from the listed dynamic DNS service providers before enabling this option.
If the WAN connection's IP address is a reserved private IP address (i.e., behind a NAT
router), the public IP of each WAN will be automatically reported to the DNS service provider.
Either upon a change in IP addresses or every 23 days without link reconnection, the Pepwave
router will connect to the dynamic DNS service provider to perform an IP address update
within the provider’s records.
The settings for dynamic DNS service provider(s) and the association of hostname(s) are
configured via Network>WAN>Details>Dynamic DNS Service Provider/Dynamic DNS
Settings.
This setting specifies the dynamic DNS service provider to be used for the WAN
based on supported dynamic DNS service providers:
● changeip.com
● dyndns.org
● no-ip.org
● tzo.com
● DNS-O-Matic
● Others…
Support custom Dynamic DNS servers by entering its URL. Works with
any service compatible with DynDNS API.
To Next Page
Loading...
Need help?
General
