Select the channel width for this Wi-Fi WAN. 20MHz will have greater support for older
devices using 2.4Ghz, while 40MHz is appropriate for networks with newer devices that
connect using 5Ghz
Determine whether the channel will be automatically selected. If you select custom, the
following table will appear:
Selecting Auto will enable the router to automatically determine the best data rate, while
manually selecting a rate will force devices to connect using the fixed rate.
If you are setting up a network with many Wi-Fi devices in close proximity, then you can
configure the output power here. Click the “boost” button for additional power. However, with
that option ticked, output power may exced local regulatory limits.
Checking this box will enable Wi-Fi roaming. Click the icon for additional options.
Connect to
Any Open
Mode AP
This option is to specify whether the Wi-Fi WAN will connect to any open mode access
points it finds.
This sets the threshold for the number of missed beacons.
To Next Page
Loading...
Need help?
General
