Pepwave MAX User Manual

http://www.pepwave.com
94
Copyright @ 2013 Pepwave
Admin Settings
Router Name
This field allows you to define a name for this Pepwave MAX unit.
By default, Router Name is set as MAX_XXXX, where XXXX refers to the last 4
digits of the serial number of the device.
Admin User Name
It is set as admin by default and is not customizable.
Admin Password
This field allows you to specify a new administrator password.
Confirm Admin
Password
This field allows you to verify and confirm the new administrator password.
Read-only User
Name
It is set as user by default and is not customizable.
User Password
This field allows you to specify a new user password. Once the user password is
set, the feature of read-only user will be enabled.
Confirm User
Password
This field allows you to verify and confirm the new user password.
Web Session
Timeout
This field specifies the number of hours and minutes that a web session can remain
idle before the device terminates its access to Web Admin Interface.
By default, it is set as 4 hours.
Authentication by
RADIUS
With this box is checked, Web Admin will authenticate using an external RADIUS
server.
Authenticated users are treated as "admin" users with full read-write permission.
Local "admin" and "user" accounts will be disabled. When the device is not able to
communicate with the external RADIUS server, local accounts will be enabled again
for emergency access.
Authentication options will be available once this box is checked.
Auth Protocol
This specifies the authentication protocol used. Available options are MS-CHAP v2
and PAP.
Auth Server
This specifies the access address of the external RADIUS server.
Auth Server Secret
This is the secret for accessing the RADIUS server.
Auth Timeout
This option specifies the time value for authentication timeout.
Accounting Server
This specifies the access address of the external Accounting server.
Accounting Server
Secret
This is the secret for accessing the Accounting server.
Network Connection
This option is for specifying the network connection which will be used for
authentication connection. Users can choose from LAN, WAN and VPN
connections.
Security
This option is for specifying the protocol(s) through which the Web Admin Interface
can be accessible:
 HTTP
 HTTPS
 HTTP/HTTPS
Web Admin Port
These fields are for specifying the port number at which the Web Admin Interface
can be accessible.
Web Admin Access
This option is for specifying the network interfaces through which the Web Admin

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English