Pepwave MAX User Manual

http://www.pepwave.com
95
Copyright @ 2013 Pepwave
Interface can be accessible:
 LAN only
 LAN/WAN
 If LAN/WAN is chosen, a WAN Connection Access Settings form will be
displayed.
WAN Connection Access Settings
Allowed Source
IP Subnets
This field allows you to restrict web admin access only from defined IP subnets.
 Any - Allow web admin accesses to be from anywhere, without IP address
restriction.
 Allow access from the following IP subnets only - Restrict web admin access
only from the defined IP subnets. When this is chosen, a text input area will be
displayed beneath:
The allowed IP subnet addresses should be entered into this text area. Each IP subnet
must be in form of w.x.y.z/m
Where w.x.y.z is an IP address (e.g. 192.168.0.0), and m is the subnet mask in CIDR
format, which is between 0 and 32 inclusively. For example: 192.168.0.0/24
To define multiple subnets, separate each IP subnet one in a line. For example:
 192.168.0.0/24
 10.8.0.0/16
Allowed WAN IP
Address(es)
This is to choose which WAN IP address(es) the web server should listen on.

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English