To Next Page

To Previous Page

1-14

Prog

Man

Buttonholes

Programming while sewing

Touch this icon to determine the length of the buttonhole while sewing.

Sew the forward buttonhole seam, and then press the reverse button when you reach the end. The machine sews the

bartack and the reverse buttonhole seam, and automatically finishes the buttonhole.

The process is saved and can be repeated as often as desired.

Manual ﬁnishing

Irrespective of the method used for determining the buttonhole length, you can finish the buttonhole yourself.

To do this, touch the reverse button before or during sewing.

Finish your buttonhole at the end of the reverse buttonhole seam by pressing the reverse button.

More functions for Buttonholes

By touching this icon you can call up further functions for processing or modifying the buttonhole.

Touch this icon a further time to close the window.

This function allows you to open a window for balancing the buttonhole.

Dialoguewindow:Youcanmovethedisplayedbuttonholeinthedirectionofthearrow,usingthe+/-icons.Usea

sewn sample for reference. The buttonhole is automatically corrected.

Twin needle

This function should be switched off when sewing buttonholes. Remove the twin needle from the machine.

Buttonhole seam width

Youcanincreaseorreducethewidthofthebuttonholeseamwiththe+/-icons.

Stitch density

Youcanincreaseorreducethedensityofthebuttonholeseamwiththe+/-icons.

Stitch length

Youcanincreaseorreducethelengthofthebuttonholeseamwiththe+/-icons.

Thread tension:

Youcanchangethepre-setneedlethreadtensionwiththe+/-icons.

Stitch number for sewing-on buttons

Here you can specify the number of stitches (3-9) that are required for sewing-on your buttons.

The input is displayed on the screen.

Pfaff 2144 User Manual

Questions and Answers: