To Next Page

To Previous Page

1-16

More functions for Alphabets

By touching this icon you can call up further functions for processing or modifying the characters or the word se-

quence.

Touch the icon a further time to close the window

End to end mirroring

With this function, you can mirror letters and sequences end to end. It appears on the screen for further processing.

Side to side mirroring

With this function, you can mirror letters and sequences side to side. Each stitch is mirrored individually. The mirrored

stitch then appears on the screen for further processing.

Tie-off program

A window is opened for tying off your word sequences, automatically cutting the thread and raising the presser foot.

Tie-off is automatically activated as standard setting.

Youcanspecifyintheselectionthatthemachineistotieoffatthestart,oratthestartandendofthestitch.Touch

the corresponding icon.

If you have activated tie-off at the end, you can specify that the machine is to cut the threads and then raise the pres-

ser foot.

If you have activated ”Tie-off at end”, use the reverse button to determine the length of the seam.

Tie-off at start

By selecting this function you specify that the start of the stitch is tied off with four stitches.

Tie-off at end

By selecting this function you specify that the end of the stitch is tied off with four stitches.

Thread cutter

By touching this icon, you can specify that the machine is to cut the needle thread and bobbin thread at the start or

at the end of the seam automatically.

Single stitch:

Word sequences can be sewn as single stitches.

Youcanalsodefineanumberofwordsequencesasasinglestitch.

Tie-off is automatically performed at the start and end.

Youcandeterminethenumberofrepeatsviathe+/-icons.

Balance

This function allows you to open a window for correcting the word sequence.

Dialoguewindow:Youcanmovethedisplayedwordsequenceinthedirectionofthearrow,usingthe+/-icons.Usea

sewn specimen for reference. The word sequence is automatically corrected.

Twin needle

This function reduces the width of the stitch so that a twin needle can be used.

This function should be switched off for this function. Remove the twin needle from the machine.

Pfaff 2144 User Manual

Questions and Answers: