7 - 2
Controls
7.03 Machine head keys
● When the respective key is operated, a
certain function is carried out.
Key 1: Sewing in reverse
As long as the key is operated,
the feed direction is reversed.
Key 2: The roller presser feed stroke is
reduced by pressing this key.
Key 3: The roller presser feed stroke is
increased by pressing this key.
Diode 4: Diode 4 flashes when the pre-
selected number of stitches for
the bobbin thread control has
been reached, see Chapter 9.11
Setting the bobbin thread
control with the stitch count
function.
Key 5: The thread tension is released by
pressing key 5.
Fig. 7 - 03
5
3
241
To Next Page
Loading...
Need help?
General
