Adjustment
13 - 12
13.04.10 Roller presser height level switch
Requirement
1. There should be a space of approx. 1 mm between switch 1 and retaining collar 5.
2.
When the roller presser is raised approx. 3mm with the hand lever, the diode 6 of
switch 1 should light up.
● Switch on the machine.
● Adjust switch 1 (screws 2) in accordance with requirement 1.
● Adjust bracket 3 (screws 4) in accordance with requirement 2.
The height adjustment of switch 1 defines from which material thickness the
increased thread tension becomes effective. This adjustment may therefore
differ depending on the material.
Fig. 13 - 09a
2
4
1
5
3
6
To Next Page
Loading...
