Sewing
10 - 7
10
.03.01 Fullness adjustment
In programmed sewing the programmed fullness can be corrected directly without changing
the seam program. It is only possible to enter a fullness adjustment if an amount of fullness
is programmed in at least one seam section. The fullness adjustment can have an effect on
the complete seam program or merely on the current seam section.
- If the fullness adjustment in the first seam section is entered before sewing begins, then
the fullness adjustment applies to the complete seam program (only seam sections with
programmed fullness) and is maintained.
(Stitch length small, adjustment value large)
- If the fullness is adjusted after sewing starts,, the adjustment only has effect on the
current seam section.
(Stitch length large, adjustment value small)
2.6
+0.0
2.6
+0.0
10.03.02 Selecting the garment size
Based on the programmed basic size, in programmed sewing it is possible to select a
garment size. The seam sections, which were given a graduated value during programming,
are converted to the new size.
● Call up the menu for selecting the garment size.
● Select the desired garment size.
● Confirm selection and exit selection menu.
To Next Page
Loading...
Need help?
General
