Pfaff 3834-14/11 - Program Interruption; Error Messages

Sewing
10 - 8
10
.03.03 Program interruption
With the "program interruption" function the programmed seam sequence is interrupted (e.g.
if the thread breaks).
● Interrupt program sequence.
● If necessary, tact forwards or backwards through the sections of the seam program.
● If necessary, alter the seam backtacks and thread tension and carry out the other
functions as in manual sewing, see Chapter 10.01 Manual sewing.
● If necessary, call up programmed sewing again.
10.04 Error messages
If an error occurs, the text "ERROR" appears on the display, together with an error code. An
error message is caused by incorrect settings, defective elements or seam programs and by
overload conditions.
For an explanation of the error codes see Chapter 13.07 Explanation of the error
messages.
● Eliminate the error.
● Confirm error elimination.
ERROR: E005
2.7 2.5
50