Input
11 - 8
11
.02 Examples of how to create seam programs
11.02.01 Example of a seam program input using the
"Creating/adjusting a program" function
The seam program to be created should
- consist of a right and a left sleeve seam (beginning with the right)
- contain 2 seam sections
- be based on a basic size 50 (German men’s size)
- have a basic stitch length of 2.5 mm
- be stored under the program number "10" with the comment "seam 1".
● Switch on the machine.
● Select the program number "10", see Chapter 9.07 Selecting a program number.
● Call up the input mode.
● Call up the "Creating/adjusting a seam program" function.
● Set the basic size "50".
● Set the feed stroke "2.5" as the basic stitch length for the feed wheel.
● Set the seam type (left and right seam, beginning with right) by pressing until the
appropriate symbol appears.
● Call up the menu for comment input.
● Enter the comment with the keyboard and number panel.
● Conclude comment input.
● Change to input of the first seam section.
2.5
2.5
10 1 1
NAHT 1
To Next Page
Loading...
