Pfaff 3834-14/11 - Adjusting the Basic Machine; Positioning the Needle in the Direction of Sewing

Adjustment
13 - 2
13.04 Adjusting the basic machine
13.04.01 Positioning the needle in the direction of sewing
Requirement
The needle must penetrate the middle of the needle hole as viewed in the direction of
sewing.
● Move the needle bar frame 1 ( screws 2 and 4 and nut 3 ) in accordance with the
requirement.
Screws 4 are accessible through the holes on the back of the housing.
Fig. 13 - 01
3
3
87-018
2
1