Preparation
9 - 8
9
.09 Entering the fullness area for the pedal adjustment
With parameter "107" it is possible to stipulate the maximum feed stroke of the roller pres-
ser, which can be called up in infinite variations with the fullness pedal (left pedal).
● Switch on the machine.
● Call up the input mode.
● Select parameter "107".
4.0
107
● Set the maximum feed stroke of the roller presser with the fullness pedal (left pedal).
● Conclude the input.
When the fullness pedal is activated, a bar display appears on the screen which shows
the actual amount of fullness in the fullness area entered, dependent on the pedal
setting.
2.5 2.5
50
To Next Page
Loading...
Need help?
General
