Care and Maintenance
12 - 2
11 - 2
Fig. 12 - 02
12.02 Oiling the hook
Switch the machine off!
Danger of injury if the machine
is started accidentally!
● Pour 1-2 drops of oil into hole 1 of the
hook gib daily.
● Before commissioning the machine, and
after long periods out of operation, pour a
few drops of oil into the hook race (see
arrow).
12.03 Checking the oil levels
Before each operation check
the oil levels..
Oil must always be visible in
the reserve tanks 1 and 2.
● If necessary, fill in oil through the
respective hole of the reserve tank.
Fig. 12 - 03
1
2
Use only oil with a mean viscosity of 22.0 mm
2
/s at 40°C and a density of
0.865 g/cm
3
at 15°C.
We recommend PFAFF sewing machine oil Best.-Nr. 280-1-120 144.
1