Pfaff 3834-14/11 - Switching on; Adjusting the Bobbin Thread Control with the Stitch Count Function

Preparation
9 - 10
● If applicable, activate the stitch placement function and enter the value for the stitch
position.
● Conclude the start backtack input.
● Call up the backtack input menu.
The input for the end backtack value is analogous to that for the start backtack. The
pedal-controlled backtack speed and the stitch placement position cannot be selected at
the end of the seam.
9.11 Switching on / adjusting the bobbin thread control with the stitch count
function
● Switch on the machine.
● Call up the input mode.
7
2.5 2.5
50
2.5 2.5
50