Mounting and commissioning the machine
8 - 2
Fig. 8 - 02
8.01.02 Fitting the tilt lock
Switch off the machine!
Danger of injury if the machine
is the machine is started
accidentally!
● Attach the tilt lock 1 and 2 from the
accessories with screws 3 and 4.
Do not operate the machine
without tilt lock 1. Danger of
crushing between sewing head
and table top!
1
2
3
4
8.01.03 Fitting the machine cover
● Slide the slots of the lower section of the
cover 1 behind the heads of screws 2
and attach with screws 3, then tighten
screws 2 through the holes.
● Attach right and left cover sections with
screws 4.
4
1
2
3
4
4
Fig. 8 - 03
To Next Page
Loading...
