Pfaff 3834-14/11 - Page 57

Input
11 - 9
In the first seam section
- the seam length should be 50 mm and
- the roller presser should work with a feed stroke (stitch length) of 2.6 mm.
● Select the value 2.6 for the feed stroke (stitch length) of the roller presser.
● Enter the value "50" as the length of the seam section.
● Change to input of the second seam section.
In the second seam section
- the seam length should be 30 mm and
- the roller presser should work with a feed stroke (stitch length) of 2.6 mm.
● Select the value 2.6 for the feed stroke (stitch length) of the roller presser.
● Enter the value "30" as the length of the seam section.
● Activate the "end of seam" function.
● Change to input of second seam (left seam).
● Enter the seam sections of the left seam in the same way as the above seam sections.
● Activate the "end of program" function.
● Conclude the seam program input and change to the programmed sewing mode.
2.6
50
2.6
30
40
10
15 2.5
2.6
+0
0.0
15