Sewing
10 - 2
Start backtack
This opens the menu for entering the seam start, see Chapter 9.10 Entering the start and
end backtacks.
End backtack
This opens the menu for entering the seam end, see Chapter 9.10 Entering the start and
end backtacks.
Thread tension
This changes the needle thread tension, see Chapter 9.06 Adjusting the needle thread
tension.
Needle raised
Moves the needle to its highest position (t.d.c take-up lever.)
Winding the bobbin thread
Enables winding without the feed motion of roller presser and feed wheel.
Bartack suppression
When pressed once, this suppresses the next bartack.
When pressed twice, this suppresses the next two bartacks.
Needle position raised
When this function is activated, the needle moves to its highest position (t.d.c take-up lever.)
after sewing stops.
Thread trimming
When activated, this function enables thread trimming with the pedal function.
Roller presser raised
When activated, this function raises the roller presser after sewing stops.
Roller presser lowered after thread trimming
When this function is activated, the roller presser is not raised after thread trimming.
● Sewing is carried out with the pedal functions, see Chapter 7.03 Pedal.
50
To Next Page
Loading...
