Input
11 - 3
2.5
● Set the feed stroke for the feed wheel as basic stitch length.
● Set the seam type (by pressing the appropriate symbol several times until the appropriate
seam type is displayed).
Example in this case: right and left sleeve seam, beginning with the right seam.
● If applicable, enter or change a comment.
● Conclude the input of the basic settings and change to the seam section input, see
Chapter 11.01.02 Seam program input with the "Creating/adjusting a program"
function or Chapter 11.01.03 Seam program input with the "Teach in" function.
The input can also be concluded by calling up the sewing mode. In this case the
seam program input is concluded and the machine changes to programmed
sewing.
To Next Page
Loading...
