Pfaff 591 User Manual

Adjustment
11 - 51
61-091
61-093
2
11
.07.04 Position of the thread catcher
Requirement
1. The bottom edge of thread catcher 1 should be 0.6 mm away from bobbin case 3.
2. When the thread trimmer is in its resting position, the back edge of the thread catcher
should be approx. 3 – 4 mm behind the edge of the knife.
● Move or turn thread catcher 1 (screws 2, two screws) in accordance with the
requirements.
Thread catcher 1 must be parallel to the surface of the thread catcher holder 4.
Fig. 11 - 47
1
3
0.6 mm
61-101
3 - 4 mm
1
4

Pfaff 591 Specifications

General

Brand	Pfaff
Model	591
Category	Sewing Machine
Language	English