Pfaff creative 3.0 User Manual

4:5
Sewing mode
Stitch density
+ –
+
–
Stitch length
Increase or decrease the stitch length using + and -.
The number above the control shows stitch length
in mm. If lengthening a zigzag stitch or a decorative
stitch, the entire stitch will be longer. If lengthening
a satin stitch where the density can be adjusted,
the entire stitch will be longer but the density will
remain the same.
6WLWFKGHQVLW\
The stitch density control adjusts the density (the
closeness of the satin stitches that make up the
entire stitch). The density does not affect the actual
length of the entire stitch.
Touch + to decrease the density. Touch - to increase
the density. The number above the control shows
the distance between satin stitches in mm.
Note: This is often used with specialty threads and when
a less dense satin stitch is desired.
Balance
When sewing on special fabrics or doing a special
technique, the balance may need to be adjusted. If
a stitch can be balanced, a long touch symbol will
appear in the stitch length/density control.
To ensure a good result, start with sewing a test
sample on the fabric you will use. Long touch the
stitch length/density control to activate balance.
Use the + and - icons to adjust the forward/
backward balance of the stitch.
Note: Buttonholes can also be balanced.
Balance forward/backward
Stitch length

Pfaff creative 3.0 Specifications

General

Sewing and Embroidery Functions	Yes
Display	Color Touch Screen
Built-in Stitches	254
USB Connectivity	Yes
Automatic Thread Cutter	Yes
Type	Computerized Sewing and Embroidery Machine
Number of Stitches	254
Built-in Embroidery Designs	157
Needle Threader	Automatic
Bobbin Winding	Automatic
Presser Feet	Included
Automatic Needle Threader	Yes
Speed Control	Yes
USB Port	Yes
Built-in Memory	Yes
Stitch Length	6 mm
LCD Screen	Color Touch Screen
Stitch Width	9 mm
Max Sewing Speed	800 stitches per minute