2:12
Preparations
USB port
Your machine has a USB port to connect your USB
embroidery stick.
Note: Make sure that the USB stick you use has the
format FAT32.
86%HPEURLGHU\VWLFN
Delivered with your machine is an USB embroidery
stick. Use the stick to store designs and embroidery
fonts.
Connect to and remove from USB port
Insert the USB embroidery stick in the port. The
USB plug can only be inserted one way – do not
force it into the port!
To remove, carefully pull the USB embroidery stick
out straight.
8VLQJWKH86%HPEURLGHU\VWLFN
A light at the end of the stick indicates that the USB
embroidery stick is plugged in correctly. When
loading from the USB embroidery stick, the light
ÁDVKHV
Note: Do not remove the USB embroidery stick while the
OLJKWLVÁDVKLQJDVWKLVFDQGDPDJHWKHÀOHVRQ\RXU86%
embroidery stick.
&RPSOLPHQWDU\VRIWZDUH3&
A PC software package is available for your PFAFF
®
creative
™
3.0 sewing and embroidery machine. It
adds following features:
• QuickFont program to create unlimited number
of embroidery fonts from most TrueType
®
and
OpenType
®
fonts on your computer.
• Handling of embroidery designs: viewing
designs as thumbnail images, reading different
HPEURLGHU\ÀOHIRUPDWVDGGWULPFRPPDQGV
and more.
Go to PFAFF
®
website at www.pfaff.com and look
for Embroidery Machines Support and download
the software. When you install you will be asked for
Installation Code. Enter number:
8200
More information and detailed installation
instructions are available on the download page.
Note: The USB embroidery
stick provided with the
machine can be left in the
machine when putting on
the hard cover. Make sure
that the cover of the USB
stick is turned downwards.
To Next Page
Loading...
Need help?
General
