4:12
Sewing mode
Patchwork program
The patchwork program makes it possible for you
to program an exact seam length that can be sewn
repeatedly. This is very useful when quilting.
To program a seam length, activate the patchwork
program. Sew your desired seam length and press
the reverse button. The action indicator on the
machine will be lit until the last repetition of the
VWLWFKLVÀQLVKHG7KLVZLOOVHWWKHOHQJWKRIWKH
seam.
After you have programmed the patchwork
sequence, the patchwork program icon is inactive.
The single stitch program is now activated instead.
Combining Tapering and Patchwork
or Single stitch programs
Combining Tapering and Patchwork or Single stitch
programs makes it possible to repeat a tapered seam
with the same length.
Activate tapering by selecting any of the tapering
icons then activate Patchwork by touching the icon.
Follow the instructions for tapering on the previous
page. When the reverse button is pressed the action
indicator will be lit until the taper and last repetion
RIWKHVWLWFKLVÀQLVKHG
The stitch is now programmed and the single stitch
program is activated. When you start to sew again
the stitch will automatically be repeated with the
same length.
Between the + and - icons the number of repetitions
in the program is shown. Use the + and - icons to
adjust the length of the seam.
Note: The tapering is included in the repetitions shown
on the screen.
Sequencing
Touch this icon to open sequencing. In sequencing
you can create and adjust a sequence of stitches and
letters. Read about sequencing in chapter 5.
Stitch Creator
™
feature
Touch this icon to open Stitch Creator
™
feature.
Stitch Creator
™
feature allows you to create your
own 9mm stitches or edit built-in stitches. Every
single stitch point can be edited. Read about Stitch
Creator
™
feature in chapter 6.
Singel stitch program
Patchwork program
Sequencing
Stitch Creator
™
feature
To Next Page
Loading...
Need help?
General
