9:6
Embroidery mode - stitch-out
Bobbin position
To make it easier to change the bobbin, touch
bobbin position. The hoop will move backwards,
allowing you to open the bobbin cover and replace
the empty bobbin.
Cut position
Cut position will move the hoop towards you
making it easier to cut jump stitches and trim fabric
when embroidering, e.g. an appliqué.
Center position
Use the center position if you want to check where
the center position of the hoop will be placed on the
fabric.
Color block list
All colors in the loaded design(s) are shown in the
order they will be embroidered. Each listed color
shows color order and number. Use the scroll bar to
see all of the colors in the list. Touch a color block in
WKHFRORUEORFNOLVWWRVHWWKHFXUUHQWVWLWFKWRWKHÀUVW
stitch in that color block.
Thread number is displayed for designs in .VP3 and
.VIP-format. Thread manufacturer will be shown
when using Quick help on a color block.
Example (A): 1:2, 2296 means the second thread color in
WKHÀUVWORDGHGGHVLJQLVFRORUQXPEHU
5HWXUQWR(PEURLGHU\HGLW
If you want to return to Embroidery edit, touch
return to Embroidery edit icon on the option bar.
When returning to Embroidery edit the embroidery
arm will move to park position.
Note: It is very important that the hoop is removed before
return to Embroidery edit, otherwise it may be damaged.
Return to
Embroidery edit
A
To Next Page
Loading...
Need help?
General
