Pfaff creative 3.0 User Manual

4:21
Sewing mode
Common sewing pop-ups
Bobbin thread low
When the bobbin thread is running low, a pop-up
message appears giving you an indication that the
bobbin needs to be changed soon. This gives you
an opportunity to plan where to stop sewing and
change the bobbin. If you want to continue sewing,
touch the foot control without closing the pop-up.
When the bobbin is replaced with a full one, touch
OK in the pop-up.
Check needle thread
The machine stops automatically if the needle
thread runs out or breaks. Re-thread the needle
thread, close the pop-up and start sewing again.
Remove Sensormatic buttonhole foot
The Sensormatic buttonhole foot needs to be
removed before doing any of the following:
• Sewing a stitch that is not a buttonhole.
• Sewing a buttonhole that can not be sewn with
the Sensormatic buttonhole foot.
• Sewing an adjusted buttonhole saved without
the Sensormatic buttonhole foot in your
Personal menu.
Machine needs to rest
If the machine stops and this pop-up appears on
the screen, the machine needs to rest. When the OK
icon is enabled you can resume sewing. The sewing
results will not be affected.

Pfaff creative 3.0 Specifications

General

Sewing and Embroidery Functions	Yes
Display	Color Touch Screen
Built-in Stitches	254
USB Connectivity	Yes
Automatic Thread Cutter	Yes
Type	Computerized Sewing and Embroidery Machine
Number of Stitches	254
Built-in Embroidery Designs	157
Needle Threader	Automatic
Bobbin Winding	Automatic
Presser Feet	Included
Automatic Needle Threader	Yes
Speed Control	Yes
USB Port	Yes
Built-in Memory	Yes
Stitch Length	6 mm
LCD Screen	Color Touch Screen
Stitch Width	9 mm
Max Sewing Speed	800 stitches per minute