4:16
Sewing mode
Manual buttonhole
To sew a manual buttonhole, use presser foot
06HZWKHÀUVWFROXPQDVORQJDV\RXZDQWWKH
buttonhole. Touch the reverse button. The machine
sews the bartack and the second column. When the
columns are aligned, press the reverse button to sew
the second bartack.
Repeat a manual buttonhole
When you have adjusted your buttonhole, use the
repeat buttonhole function to sew identical copies.
As long as that icon is selected, the machine will
repeat the buttonhole over and over again. Repeat
buttonhole is only visible when sewing a buttonhole
manually.
To cancel the function, just deselect the icon.
The repeat function will also be cancelled if any
adjustments are made.
Corded buttonhole
Corded buttonholes that are sewn with gimp
threads are more stable, durable and have a
professional appearance. Use pearl cotton or a
regular gimp thread.
1. Place the center of a length of gimp thread over
the metal bar extending from the center back of
the Manual buttonhole foot 5M. Pass the thread
ends under the foot to the front of the foot.
2. Snap on the Manual buttonhole foot 5M.
3. After completing the buttonhole, pull the ends
of the gimp thread until the loop of thread is
hidden below the buttonhole bartack.
4. Thread the gimp threads into a needle and pull
them to the wrong side of the garment. Tie the
gimp threads and cut off the excess thread.
Repeat buttonhole
To Next Page
Loading...
Need help?
General
