Sewing
22
8.02.01 Switching the sewing functions on / off
When the "TE / input" selection key is switched off, the sewing functions for the
current seam sector can be switched on or off. If a function is activated, the LED in the
corresponding key is illuminated:
Start tacks on/off
Foot position raised after sewing
stops on/off
End tacks on/off
Foot position raised at end of seam
sector on/off
Needle position raised
on/off
Light barrier on/off
Thread trimming on/off Function on/off
8.02.02 Selecting seam program, seam segment or number of seam segment
stitches
● Call up the display diagram for the seam program number, seam segment number and
the number of the seam segment stitches (if necessary, press key several times).
● Switch on the "TE / input" function (LED is illuminated).
1 1 10
The corresponding set values are shown on the display and can be altered as follows:
Select the seam
program (A+)
Select the seam segment (B-)
Select the seam program
(A-)
Increase the number of seam
segment stitches (D+)
Select the seam segment
(B+)
Reduce the number of seam
segment stitches (D-)
● Enter the set values accordingly.
To Next Page
Loading...
Need help?
General