Pfaff P45 PD 2-L - List of Parameters for Control Unit P74 ED-L

Input P74 ED
52
9.03.04 List of parameters for control unit P74 ED-L
Only appropriately trained personnel is authorized to alter the set values in the
parameters of user level "B" and "C".
Group Parameter Description User level Setting range Set value
1
101 Control panel key tone A ON - OFF ON
105 Speed at seam start B 100 - 6400 800
106 Speed at seam start
ON = variable (pedal-controlled)
OFF = constant (as for parameter 105)
B ON - OFF OFF
107 Speed at seam start
ON = limited by parameter 105
OFF = limited by parameter 607
B ON - OFF OFF
110 Speed at seam end B 100 - 6400 800
111 Light barrier compensating stitches A 1 - 255 8
112 No. of stitches for blocking out light barrier for
knitted fabrics
A 0 - 255 0
113 Start with light barrier
ON = only if light barrier dark
OFF = also when light barrier bright
B ON - OFF OFF
116 Soft starting stitches (soft start) A 0 - 255 1
117 Speed for soft starting stitches (soft start) B 30 - 640 400
118 Signal at output is
ON = needle cooling
OFF = motor operation
B ON - OFF ON
151 On position for feed reverse
with intermediate backtack
B 0 - 255 20
152 On position for feed reverse
with intermediate backtack
B 0 - 255 20
153 Start tack
(when parameter 523 is set at "1")
ON = ornamental tack,
OFF = standard tack
B ON - OFF ON