Sewing
23
8.02.03 Selecting the speed, next program and number of seam segments
● Call up the display diagram for the speed, the next program and the number of seam
segments (if necessary, press key several times).
● Switch on the "TE / input" function (LED is illuminated).
1000 0 5
The corresponding set values are shown on the display and can be altered as follows:
Alter the speed (A+) Select the next program (C+)
Alter the speed (A-) Select the next program (C-)
Alter the speed (B+)
Alter the number of seam
segments (D+)
Alter the speed (B-)
Alter the number of seam
segments (D-)
● Enter the set values for the start and end bartacks..