Service functions
66
10.01.04 Cold start
With this function a cold start is carried out. All inputs are deleted and all set parameter
values are set back to their default value (status at time of delivery), see Chapter 9.03.03
List of parameters.
● Call up the reset function, see Chapter 10.01.01 Calling up the reset function.
Danger of unintentional data loss!
After operating the corresponding function key, the selected reset is carried out
without further check.
● Reset the set parameter values by pressing the corresponding function key.
The cold start is carried out. The following display appears on the screen for a short time.
After the operation is completed, the previous machine status is called up again
automatically.
ResetAll
1 2 3
To Next Page
Loading...
Need help?
General