Read This First Intended Audience
10 Lumify Ultrasound System
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
Unauthorized copying of this document, in addition to infringing copyright, might reduce the
ability of Philips to provide accurate and current information to users.
Non-Philips product names may be trademarks of their respective owners.
Intended Audience
Before you use your user information, you need to be familiar with ultrasound techniques.
Sonography training and clinical procedures are not included here.
This document is intended for healthcare professionals who operate and maintain your Philips
product.
Intended Use
The intended use of the product is diagnostic ultrasound imaging and fluid flow analysis of the
human body. See “Indications for Use and Supporting Transducers” on page 69.The product
shall provide the ability for gathering clinically acceptable images and ultrasound data for the
clinical applications and anatomies listed in the table provided in “Clinical Applications and
Transducers” on page 116. The intended use environments include clinics, hospitals, and
clinical point-of-care for diagnosis of patients.
This product is intended to be installed, used, and operated only in accordance with the safety
procedures and operating instructions given in the product user information, and only for the
purposes for which it was designed. However, nothing stated in the user information reduces
your responsibility for sound clinical judgment and best clinical procedure.
The Lumify Ultrasound System is intended for diagnostic ultrasound imaging in B-mode
(2D mode) and in color Doppler (color flow). The system is indicated for diagnostic ultrasound
imaging and fluid flow analysis in the following applications: Fetal/Obstetric, Abdominal,
Urology, Gynecological, Cardiac Fetal, Small Organ, Musculoskeletal, Peripheral Vessel, and
Carotid. Lumify is intended for use in environments where healthcare is provided by healthcare
professionals, with the exception of home, air, and emergency vehicles.