System Overview System Settings
72 Lumify Ultrasound System
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
Data Storage
You can export exams and images to a DICOM PACS, to a network share, or to a local directory.
You can also e-mail images. Supported e-mail applications include Gmail, K-9 Mail, Yahoo,
Outlook, and Inbox. For more information, see “Exporting Exams” on page 106, “E-mailing
Exams” on page 108 and “E-mailing Images” on page 105.
System Settings
To configure the settings for your system, touch and then select Settings .
Name Description
Audit Logs Allows you to view audit logs, which contain actions such as exam start, exam end,
and exam export or e-mail. For more information, see “Viewing Audit Logs” on page
153.
Barcode Scanner Allows you to add and rearrange barcode formats.
Control Orientation Allows you to set the orientation of the display. To set the location of the imaging
controls, touch Left or Right.
Loop Duration Allows you to control the duration of a loop. To set the loop length (in seconds), drag
the slider. For more information about acquiring loops, see “Acquiring Loops” on page
99.
Patient Database Allows you to repair or reset the patient database. To remove corruption in the
system, touch Repair Database. To delete all patient data and reset the database,
touch Reset Database. For more information, see “Deleting Patient Data and Lumify
Settings” on page 86.
Power Control Displays a control that you can use to adjust the output power.
Power Saving Allows you to specify that the system reduce the frame rate while you are in the
imaging display but not actively scanning a patient. Reducing the frame rate saves
power and extends battery life.
To Next Page
Loading...