Setting the System Time and Date Using the System
Lumify Ultrasound System 79
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
Setting the System Time and Date
The Lumify app uses your device's clock and calendar function to display the time and date on
the imaging display, and to provide a time stamp on patient exams and acquired images. If you
change the time or date on your device, the Lumify app prompts you to restart.
For instructions on changing the time and date, see the documentation that accompanies your
device.
Setting the Thermal Index Display
You can set which of the thermal indices to display depending on the type of tissue you are
imaging.
1. Touch and select Settings .
2. In Thermal Index Display, select the thermal index you want.
Imaging Display
The imaging display contains an ultrasound image, exam and image information, indicators, and
system controls.
The exam information includes the patient data, the current time and date, and the MI and TI
values. The system does not display patient data until you start an exam.
Image information is displayed next to the image. This includes the transducer and selected
preset. The controls area contains depth, gain, freeze, mode, and power controls. The location
of the controls area changes depending on the orientation of your device.
To Next Page
Loading...