Philips Lumify - Low-level Disinfecting of Transducers

Low-level Disinfecting of Transducers Transducer Care
Lumify Ultrasound System 135
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
Immersion Point for USB Transducers
1 Immerse this portion only.
2 Maximum allowable immersion depth; you are not required to immerse to this depth if it is unnecessary.
Low-level Disinfecting of Transducers
Low-level disinfection of USB transducers uses the spray or wipe method, with a low-level or
intermediate-level disinfectant.
Before disinfecting a transducer, read the warnings and cautions in “Safety” and in “Transducer
Care and Operator Safety” on page 125.
WARNING
Always use protective eyewear and gloves when cleaning and disinfecting any equipment.