Philips Lumify - Showing or Hiding Patient Data on Exported Images

Showing or Hiding Patient Data on Exported Images Review
Lumify Ultrasound System 107
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
3. Select a destination from the Export Exam menu. (To add a new destination, select Add
New. For more information, see “Configuring Export Destinations” on page 109.)
A confirmation message appears when the export is complete.
Showing or Hiding Patient Data on Exported Images
You can choose to show or hide patient information on images and loops that you export to a
DICOM server, to a network share, or to a local directory. By default, the system includes
patient data when you export to a network share or to a local directory, and removes patient
data when you export to a DICOM server.
1. Touch and select Export Destinations .
2. Select the export destination for which you want to specify that patient data be shown or
hidden (if you need to add an export destination, see “Configuring Export Destinations” on
page 109).
3. Select Show Advanced Options.
4. Do one of the following:
• To show patient information on exported images and loops, select Include Patient Data
on Each Image.
• To hide patient information on exported images and loops, deselect Include Patient
Data on Each Image.