Acquiring Loops Performing an Exam
Lumify Ultrasound System 99
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
• To make a measurement, touch Measure . For more information, see “Performing
a 2D Distance Measurement” on page 96.
• To add a label, touch Annotate . For more information, see “Adding Labels” on
page 99.
• To save the image to the patient exam, touch Save Image . The system beeps when
the image acquisition is complete.
Acquiring Loops
You can acquire and save a loop from the current exam. The acquired loop is saved in the
patient exam, and a thumbnail of it is available in the Review display. Loops in Review have the
icon in the lower right corner of the thumbnail.
The system captures loops prospectively. You can specify the loop length duration in Settings.
For more information, see “System Settings” on page 72.
To acquire a loop during live imaging, touch Save Loop . To stop acquisition, touch Stop.
The system beeps and a confirmation statement appears on the imaging display when the loop
has been saved.
Annotation
You can place text labels on an image to identify anatomical structures and locations.
Adding Labels
To Next Page
Loading...