Searching in the Worklist Performing an Exam
Lumify Ultrasound System 91
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
3. To search a Modality Worklist for a specific exam, touch Create Patient and then touch
Query MWL (see “Searching in the Worklist” on page 91).
4. To enter data into the system by scanning a patient's barcode, touch Create Patient and
then touch Scan Barcode (see “Using Your Device's Camera as a Barcode Scanner” on
page 84).
Searching in the Worklist
You can search for a specific exam from a Modality Worklist by using Query MWL on the
Patient Info form. Before you can search for a Modality Worklist exam, you must configure a
connection to a Modality Worklist server (see “Adding a Modality Worklist Server” on page 87).
1.
Touch Query MWL on the Patient Info form.
2. Select the Modality Worklist server you want to query.
3. In the Enter Advanced Query Information dialog box, do any of the following:
• To search for a patient by Patient Name, MRN, Accession #, or Requested Procedure
ID, type search criteria.
• To search for all patients, leave all fields blank.
• To insert a wildcard symbol (*) in the Patient Name or MRN field that allows the system
to replace or represent one or more characters, touch Insert Wildcard. For example,
type 45678 in the MRN field and then touch Insert Wildcard to allow the system to
return all MRNs that begin with 45678 (456781, 456782, 456783, and so on.)
4. Touch Search.
5. Do any of the following:
• To see additional entries, swipe down.
• To filter the Query Results, touch Search All Fields and type criteria. The system
displays results that meet the criteria.
6. Select the patient from Query Results.
To Next Page
Loading...