Philips Lumify - Connecting Transducers; Deleting Patient Data and Lumify Settings; Modality Worklist

Using the System Connecting Transducers
86 Lumify Ultrasound System
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
Connecting Transducers
Plug the transducer into the USB port on the device. When initialization is complete, the name
of the transducer appears on the imaging display.
When you first connect a transducer, the Android operating system prompts you to select
whether the Lumify app should open when the transducer (USB device) is connected. If you
select Use By Default For This USB Device and touch OK, the Lumify app opens whenever the
transducer is connected, regardless of which app is currently open on the device.
Deleting Patient Data and Lumify Settings
You can delete all patient data and Lumify settings from the system, including data from the
current exam.
To delete patient data from exported images and loops, see “Showing or Hiding Patient Data on
Exported Images” on page 107.
Do one of the following:
• To delete only patient data, touch and select Settings . Touch Reset Database.
Touch Yes to confirm.
• To delete patient data and all Lumify settings, including registration information, DICOM
logs, and audit logs, in the Android operating system, go to Settings. Touch Apps, touch
Lumify, and then touch Clear Data.
Modality Worklist
You can load patient data and select a scheduled procedure from a DICOM Modality Worklist
Server (MWL) instead of entering the patient data manually.
Before you can use the modality worklist feature, you must add a DICOM Modality Worklist
server.