Restarting a Paused Exam Performing an Exam
Lumify Ultrasound System 93
Philips Healthcare 4535 618 58571_A/795 * MAY 2016
• To delete images from a saved exam, see “Deleting Images and Loops” on page 106.
• To e-mail images from a saved exam, see “E-mailing Images” on page 105.
• To export the exam, see “Exporting Exams” on page 106.
5. To exit the Review display and return to the current exam, touch and select Current
Exam .
Restarting a Paused Exam
If you leave an exam or close the system, you can return to the open exam within 24 hours by
touching and selecting Current Exam .
Imaging Modes
Available imaging modes are 2D and Color.
2D Mode
2D mode is the most commonly used imaging mode. In 2D mode, the image is displayed in
grayscale.
Using 2D Mode
1. Start an exam. The system enters 2D mode.
2. Optimize the image, using the controls in the controls area. If necessary, touch the page
indicator ( or ) or swipe to move between controls pages.
• To control the image gain, adjust the Gain dial.
To Next Page
Loading...