Printing Reports
Trends and Calculations 8-27
Trends and
Calculations
To turn the scheduled report capability on or off, press
in the Patient Data Selection Window. This brings you
to the Scheduled Reports On/Off Task Window. The current setting (On or
Off) is indicated, and a softkey is highlighted (for example, if scheduled
reports are off, the key is highlighted). Press the
highlighted key to change the setting.
To cancel a report, press in the Selection Window
under . This cancels only the report that is currently
printing. Any reports that have been waiting will then print.
Refer to “What to Do If Your Report Does Not Print” on page 8-30 for
troubleshooting information.
Trends/Calcs
To Next Page
Loading...
