Monitor Maintenance
13-6 Maintenance
Maintenance
Monitor Maintenance
The following is a list of the tasks and procedures to maintain the
monitor.
• Performance Assurance Test
• Functional Testing procedures
• Preventative Maintenance
• Check Accuracy and Calibration of NBP and Temperature
The recommended maintenance schedule is shown in the following
table.
Recommended Maintenance Schedule
Procedure Frequency Source of Information
Testing of all cables and
cords.
Daily. See the following pages of
this chapter.
Electrical Safety Tests At least every two years,
after system installation,
after any repairs, or as
needed.
See “Testing and
Maintaining the CMS” in the
“CMS Service Guide” or
“Testing and Maintaining
the V24 and V26“in the “V24
and V26 Service Guide”.
Functional Testing
Procedures
Once a year See the following pages of
this chapter or “Testing and
Maintaining the CMS” in the
“CMS Service Guide” or
“Testing and Maintaining
the V24 and V26“in the “V24
and V26 Service Guide”.
To Next Page
Loading...
