Philips V60 - Index Entries (T-V)

Index
Index-5
ventilator startup 3-15
Symbols 2-1–2-9
System Settings functions, in diagnostic mode E-3
T
Technical specifications 11-1–11-9
alarm settings 11-4
control setting ranges, resolutions, and accuracies 11-1–
11-2
delivered pressure 11-10
dimensions 11-6
electrical 11-7, 11-8
environmental 11-6
high flow therapy (HFT) 11-1, 11-10
monitored parameter ranges, resolutions, and accuracies
11-3
patient circuit 11-8
patient data ranges, resolutions, and accuracies 11-3
ventilator startup time 11-10
weight 11-6
Tests
alarm tests 5-9–5-10
exhalation port 6-16–6-17
T
I
/T
TOT
(duty cycle) monitored parameter, definition 8-2, B-
3
Tidal volume, estimated exhaled. See V
T
Time and date, how to change E-6
Timed breath type indicator, definition 8-2
Tot.Leak (estimated total leak) monitored parameter, defini-
tion 8-2
Total leak. See Tot.Leak
Touchscreen
how to calibrate E-14
Training information 3-15
Trigger (trigger sensitivity) setting, definition 6-26
Trigger +x, E-Cycle +x message 9-12
Triggering
principles of operation 4-3
volume method 4-3
Troubleshooting alarms 9-7–9-17
U
Unpacking and inspection A-1
Using Default Settings message 9-12
V
Vent Info (Ventilator Information) window, description 6-18
Vent Inoperative 1000 3.3 V Supply Failed alarm 9-16
Vent Inoperative 1001 12 V Supply Failed alarm 9-16
Vent Inoperative 1002 Blower Temperature Too High alarm
9-16
Vent Inoperative 1003 Internal Temperature High alarm 9-
16
Vent Inoperative 1004 Internal Temperature High alarm 9-
16
Vent Inoperative 1005 Internal Temperature High alarm 9-
17
Vent Inoperative 1006 Data Acquisition PCBA ADC Failed
alarm 9-17
Vent Inoperative 1007 Machine and Proximal Pressure Sen-
sors Failed alarm 9-17
Vent Inoperative 1008 Machine and Proximal Pressure Sen-
sors Failed alarm 9-17
Vent Inoperative 1009 Pressure Regulation High alarm 9-17
Vent Inoperative 100A Data Acquisition PCBA ADC Refer-
ence Failed alarm 9-17
Vent Inoperative 100B Watchdog Test Failed alarm 9-17
Vent Inoperative alarm, description 9-3
Ventilation modes
how to change 6-2
principles of operation 4-7–4-14
Ventilator breathing circuit. See Patient circuit
Ventilator settings. See Control settings or Alarm settings
Verifying ventilator operation 5-8
Volume
AVAPS Target Tidal Volume. See V
T
estimated exhaled tidal. See V
T
waveform. See Waveforms
Volume assist/maximum elastance setting. See Max E
V
T
(AVAPS Target Tidal Volume) setting, definition 6-26
V
T
(estimated exhaled tidal volume) monitored parameter,
definition 8-2
VueLink Open Interface, using with the ventilator and Philips
monitors B-3–B-5
W
Warnings, cautions, and notes 1-1–1-10
Waveforms
description 8-2
how to freeze and unfreeze 8-3
how to scale axes 8-2
WEEE recycling directive, compliance statement D-7
Weight, ventilator 11-6