Operation
6-13
3. Select the desired mask/patient interface type (Table 6-1). Select
Accept to apply.
For information concerning mask/port leak characteristics, see the
instructions provided with each mask/port. See Appendix C for a list of
masks, circuits, and related components used with the ventilator.
Table 6-1: Mask/patient interface selections
Mask/patient interface type
*
* A leak symbol is printed on Respironics masks.
Description
ET/Trach ET or tracheostomy tube
Leak 1 Mask with minimal intentional leak characteristics. En-
ter Leak 1 for any of these Philips Respironics masks:
• Contour Deluxe nasal mask
• PerformaTrak mask
• AF531, AF541 (EE)
Leak 2 Mask with medium intentional leak characteristics. En-
ter Leak 2 for this mask:
• Philips Respironics PerforMax oro-nasal mask [EE]
• AF531, AF541 (EE)
Leak 3 AP111
Leak 4 Reserved for future use
Other Mask not manufactured by Philips Respironics
NOTE: If you select Other, the ventilator displays
Tot.Leak rather than Pt. Leak.
To Next Page
Loading...
