Pinell Explorer - Internet Radio Music Playback; WPS Network Connection; Battery Charging Procedure

www.pinell.no Page46
Step 2: Playing music from Media Player using the
Internet radio
After installing and configuring the radio and Windows Media Player 11, you can play music via a wireless
network.
The following steps describe how to play music with the radio.
1. Select “Shared Media” on the “Media Player” menu.
2. Select the computer from which you wish to play music.
3. Use the buttons to scroll through the following categories: All Music, Genre, All Artists, Contributing
Artists, Album Artists, Composers, Albums, Playlists, Folders or Star Ratings, and press SELECT to
confirm.
4. Select the tracks you wish to play and press SELECT. Enjoy the music!
WPS encrypted networks
WPS encrypted networks are identified by names beginning with “[WPS]”.
Go to MENU > SYSTEM SETTING > NETWORK and select PBC WLAN Setup. The radio will ask you to
press the “connect to” button on the router. It will then scan until it finds the network and connect.
For more information about setting up a WPS encrypted network, refer to the manual for the WPS router.
Charging batteries
It’s very important when charging batteries, that these are properly inserted into the radio, with
correct polarity, if not then the batteries can be damaged or they can damage the radio battery
compartment.
Full charge usually takes 8-10 hours, and battery time time is between 6-8 hours dependent of
volume and features.
Wireless network uses more power then DAB and FM. DAB gives the best battery time.