154
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
CBL/SAT HDMI 3
(HDCP 2.3)
"HDMI 1 (HDCP 2.3)" to "HDMI 4 (HDCP 2.3)":
Assign a desired HDMI IN jack to the CBL/SAT
input selector. If you do not assign a jack, select
"---". To select an HDMI IN jack already assigned
to another input selector, change its setting to "---"
rst.
STRM BOX HDMI 4
(HDCP 2.3)
"HDMI 1 (HDCP 2.3)" to "HDMI 4 (HDCP 2.3)":
Assign a desired HDMI IN jack to the STRM BOX
input selector. If you do not assign a jack, select
"---". To select an HDMI IN jack already assigned
to another input selector, change its setting to "---"
rst.
Video Input
Change input assignment between the input selectors and COMPONENT VIDEO
IN jacks and the VIDEO IN jacks. If you do not assign a jack, select "---".
Setting Item Default Value Setting Details
BD/DVD
COMPONENT 1
"COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the BD/DVD
input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the BD/DVD input selector.
GAME
COMPONENT 2
"COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the GAME input
selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the GAME input selector.
CBL/SAT VIDEO 1 "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the CBL/SAT
input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the CBL/SAT input selector.
Setting Item Default Value Setting Details
STRM BOX VIDEO 2 "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the STRM BOX
input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the STRM BOX input selector.
Digital Audio Input
You can change input assignment between the input selectors and DIGITAL
AUDIO IN COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---".
Setting Item Default Value Setting Details
BD/DVD COAXIAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired
DIGITAL AUDIO IN jack to the BD/DVD input
selector.
GAME OPTICAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired
DIGITAL AUDIO IN jack to the GAME input
selector.
CBL/SAT COAXIAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired
DIGITAL AUDIO IN jack to the CBL/SAT input
selector.
STRM BOX --- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired
DIGITAL AUDIO IN jack to the STRM BOX input
selector.
CD OPTICAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired
DIGITAL AUDIO IN jack to the CD input selector.
TV OPTICAL 3 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2", "OPTICAL 3": Assign a desired
DIGITAL AUDIO IN jack to the TV input selector.
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz,
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.
To Next Page
Loading...
