Pioneer SC-LX904 - Midnight Function Does Not Work; Other Troubles

218
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
 The measurement results of Full Auto MCACC show different distances to the speakers from the
actual ones
• Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "System
Setup" - "Speaker" - "Distance".
( p161)
 The measurement results of Full Auto MCACC show that the volume level of the subwoofer has been
corrected to the lower limit
• The volume level correction of the subwoofer may not have been completed. Lower the volume of the subwoofer before Full Auto MCACC
measurement.
 Cannot operate the Full Auto MCACC screen with the Pioneer Remote App (available on iOS and
Android
™
).
• Start the Pioneer Remote App before connecting the speaker setup microphone.
 Midnight function does not work
• Make sure the source material is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or DTS.