Pioneer SC-LX904 - Connecting External Control Devices

90
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Connecting External Control Devices
IR IN/OUT port
When connecting a remote control receiver unit consisting of an IR Receiver, etc.
to this unit, operation using the remote controller is possible even if the remote
control signal is difcult to reach (due to installation in the cabinet, etc.). It is also
possible to operate this unit from other room such as ZONE 2 with a remote
controller, or operate other devices with the remote controller by connecting
other devices to this unit. For adopting a remote control receiver unit, contact the
specialized stores.
• For the type of cable required for connection, refer to the operation manual,
etc. of the remote control receiver unit.
ZONE B
(LINE OUT)
IR Receiver