Pioneer SC-LX904 - Page 170

170
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
GAME Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input
source for the main room.
"Zone 2": Output when "GAME" is selected as input
source for ZONE2.
"Zone 3": Output when "GAME" is selected as input
source for ZONE3.
CBL/SAT Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as
input source for the main room.
"Zone 2": Output when "CBL/SAT" is selected as
input source for ZONE2.
"Zone 3": Output when "CBL/SAT" is selected as
input source for ZONE3.
STRM BOX Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "STRM BOX" is selected as
input source for the main room.
"Zone 2": Output when "STRM BOX" is selected as
input source for ZONE2.
"Zone 3": Output when "STRM BOX" is selected as
input source for ZONE3.
HDMI 5 Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 5" is selected as input
source for the main room.
HDMI 6 Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 6" is selected as input
source for the main room.
AUX Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "AUX" is selected as input
source for the main room.
Setting Item Default Value Setting Details
CD Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CD" is selected as input
source for the main room.
"Zone 2": Output when "CD" is selected as input
source for ZONE2.
"Zone 3": Output when "CD" is selected as input
source for ZONE3.
TV Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TV" is selected as input
source for the main room.
"Zone 2": Output when "TV" is selected as input
source for ZONE2.
"Zone 3": Output when "TV" is selected as input
source for ZONE3.
PHONO Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input
source for the main room.
"Zone 2": Output when "PHONO" is selected as
input source for ZONE2.
"Zone 3": Output when "PHONO" is selected as
input source for ZONE3.
TUNER Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input
source for the main room.
"Zone 2": Output when "TUNER" is selected as
input source for ZONE2.
"Zone 3": Output when "TUNER" is selected as
input source for ZONE3.