Pioneer SC-LX904 - Page 172

172
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
HDMI 5 Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 5" is selected as input
source for the main room.
HDMI 6 Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 6" is selected as input
source for the main room.
AUX Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "AUX" is selected as input
source for the main room.
CD Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CD" is selected as input
source for the main room.
"Zone 2": Output when "CD" is selected as input
source for ZONE2.
"Zone 3": Output when "CD" is selected as input
source for ZONE3.
TV Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TV" is selected as input
source for the main room.
"Zone 2": Output when "TV" is selected as input
source for ZONE2.
"Zone 3": Output when "TV" is selected as input
source for ZONE3.
PHONO Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input
source for the main room.
"Zone 2": Output when "PHONO" is selected as
input source for ZONE2.
"Zone 3": Output when "PHONO" is selected as
input source for ZONE3.
Setting Item Default Value Setting Details
TUNER Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input
source for the main room.
"Zone 2": Output when "TUNER" is selected as
input source for ZONE2.
"Zone 3": Output when "TUNER" is selected as
input source for ZONE3.
NET Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "NET" is selected as input
source for the main room.
"Zone 2": Output when "NET" is selected as input
source for ZONE2.
"Zone 3": Output when "NET" is selected as input
source for ZONE3.
USB FRONT Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "USB FRONT" is selected as
input source for the main room.
"Zone 2": Output when "USB FRONT" is selected
as input source for ZONE2.
"Zone 3": Output when "USB FRONT" is selected
as input source for ZONE3.
USB REAR Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "USB REAR" is selected as
input source for the main room.
"Zone 2": Output when "USB REAR" is selected as
input source for ZONE2.
"Zone 3": Output when "USB REAR" is selected as
input source for ZONE3.