Setting the WEIGH-ON-THE-WAY® (W-O-W®) weight limit
You can set the WEIGH-ON-THE-WAY (W-O-W) weight limit to prevent the system from printing
postage on pieces of mail that exceed a set weight.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Select the Weighing icon.
3. Select WEIGH-ON-THE-WAY (W-O-W).
4. Select the gram field.
5. Select Edit Limit.
a. Use the numeric keypad to type in the weight in grams.
b. Select OK twice.
6. Select the Home button to return to the Home screen.
Setting the WEIGH-ON-THE-WAY® (W-O-W®) Mode
If you have a Connect+® 500W / SendPro® P1500, Connect+® 2000 / SendPro® P2000 or Connect+®
3000 / SendPro® P3000 mailing system, there are two WEIGH-ON-THE-WAY (W-O-W) mode settings:
normal and precision.
Normal is the default mode. Precision mode allows you to obtain a more precise measurement of the
weight and dimensions of your mail pieces.
Follow the steps below to set the WEIGH-ON-THE-WAY (W-O-W) mode.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select Hardware from the list on the left side of the screen.
3. Select WEIGH-ON-THE-WAY (W-O-W).
4. Select the appropriate mode.
5. Select the Home button to return to the Home screen.
System Setup
Pitney Bowes Operator Guide February,2018 Page 241 of 349
To Next Page
Loading...
